Keeper Of The Lost Cities Pathfinder
thingiverse
just a quick Tinkercad design of my interpretation of a pathfinder from the Keeper Of The Lost Cities book series by Shannon Messenger
Keeper of The Lost Cities Linh's Brooch
thingiverse
This is a project i took up because my sister and a few of her friends were going to be some characters from the book series Keeper of the Lost Cities By Shannon Messenger. I later thought, heck, why not post it on thingiverse cause i couldnt find...
Keeper of the Lost Cities Swan Keychain with quote
thingiverse
A keychain from the popular franchise keeper of the lost cities by shannon messenger. ...I just made this pretty much on a whim, it has small details and I have not had a chance to personally print it but please run it on a fine detail quality and at a...
Lodestar Initiative Bookmark - From Keeper of the Lost Cities
thingiverse
This is a bookmark I made of the Lodestar Initiative from the book series, Keeper of the Lost Cities. I've made two variants, one without the backplate. This one while looking batter, is harder to clean up. and one with the backplate. This will...
Lost Cities: The Board Game Box Organizer
cults3d
Lost Cities is a quick and simple game to teach others but the need to separate the different tiles and coins each time I took it out of the box drove me nuts. I decided to design up a single organizer that stores all pieces easily and fits within...
Lost Cities: The Board Game Box Organizer
thingiverse
Lost Cities is a quick and simple game to teach others but the need to separate the different tiles and coins each time I took it out of the box drove me nuts. I decided to design up a single organizer that stores all pieces easily and fits within...
Keeper of The Ring
thingiverse
There are also five (5) voids designed into the print, three (3) on the Keeper Top, and two (2) in the Keeper Base. These voids were designed to hold 6mmx2mm neodymium magnets from https://amzn.to/2wMkbIW. The pivot uses a M4x8mm screw that you can...
Keeper of the heart
cults3d
... a multi-material assembly test. The head is in PLA wood, the eyes in PLA phosphorescent, the legs in carbon nylon, the heart in ABS and the rune in PLA marble and finally the bell is actually a deodorant cap.... ...That's a lot of parts to slice !
Keeper of the Crypt
cults3d
Just a guy who hangs out and tells stories. ...Makes a great book end piece if you print two of them ;) or could be split further and printed life sized.
Key- from the lost city of trellech
sketchfab
here we have a key dug from the lost city of trellech excavation. ...here is their facebook page if you’d like to participate https://www.facebook.com/lostcityoftrellech/ and their webpage http://www.lostcityoftrellech.org/
Lost Cities Game Tokens
prusaprinters
This is a replacement small token for Lost Cities the board game. I was inspired to model it after my dog ate one of the wooden explorers. ...Easy to print, but good luck matching the color!
Lost Cities Game Piece
thingiverse
This is a replacement game piece for Lost Cities the board game. I was inspired to model it after my dog ate one of the wooden explorers. Easy to print, but good luck matching the color. ...:-D
Lost Cities -- Simple Insert
prusaprinters
And I still lose all the time to my wife...But I quickly hacked a super simple insert together to keep my sleeved cards from sliding around in the box.Important: This is designed to hold the cards from the original Kosmos version of Lost Cities, not...
The Lost Tomb of Jesus
thingiverse
Inspired by The Lost Tomb of Jesus produced by James Cameron and directed by Simcha Jacobovici. ...I designed the piece to resemble a large token with the entrance way to the tomb and chevron and circle extruded above.
Rabbit keeper of the phone
cults3d
Rabbit keeper of the phone, before printing, in the slicer, increase the model at your discretion to the size you need. https://youtu.be/KvsThp3XFgI I will perform simple 3D models according to the image or your sketches, for 3D printing. ...Contact...
Sword of the Lost Crusader
sketchfab
Original sword I created based on a few of my favorite fantasy swords. ...This sword belongs to a lost crusader whose holy mission took a dark turn leading him down a path filled with blood.
Land of the Lost Pylons
thingiverse
I needed a 3D printable version of the pylons from Land of the Lost in about 28mm gaming scale. This isn't exact to the TV show; however, it makes me happy. Pairs well with the Sleestak from https://www.thingiverse.com/thing:23725 and the T-Rex...
Lost Cities Insert
thingiverse
Fits Sleeved cards and is flush with the box lid.
Poppy, Keeper of the Hammer
sketchfab
Fan art of one of my favorite league of legends characters “Poppy”.
The Keeper "The binding of Isaac"
cults3d
I designed my favorite playable character The Keeper, from the famous game "The binding of Isaac" This mini is 5.8 cms Tall
The Lost from The binding of Isaac
cults3d
Hello, I bring you a new model of the saga of models that I will bring from the game "The Binding of Isaac". ...This time I bring you The Lost, another one of the playable characters available. ...I'll keep bringing you more playable characters soon.
The light of cities series of books
3docean
This model is one of other great models that goes together in the Vol.06 Books. The Volume you can find on modelplusmodel website. ... Available formats:*.max Scanline – with Standard materials for 3ds max 2008 or higher*.max V-Ray – with...
Lost Cities (card game) Insert
thingiverse
A simple insert for the card game Lost Cities. ...I have sleeved cards.
Day 7 - Pet of the Lighthouse Keeper
sketchfab
Topic: Pet of the Lighthouse Keeper. ...40 minutes daily sculpt.
Areelu Vorlesh | Pathfinder: Wrath of the Righteous
cults3d
Pre-supported version split into 18 pieces is available as part of the welcome pack on my Patreon:https://www.patreon.com/bulkamancer I don't have any source of financial income, so your patronage would be greatly appreciated and will help me keep...
Arueshalae | Pathfinder: Wrath of the Righteous
cults3d
... was test-printed to ensure printability. ATTENTION: The bow string isn't part of the print, it's only present on renders. ...Follow our Patreon for more figures each month:https://www.patreon.com/bulkamancerUPDATE 2023/05: Added uncut version
Nocticula | Pathfinder: Wrath of the Righteous
cults3d
Meet Nocticula, Our Lady in Shadow, a demon lord and the queen of succubi. Comes in two options:- Leaning on an axe, sitting atop a slain beast....- Sitting on a rock (smaller base for more emphasis on the Lady) Follow my Patreon for more figures...
Wenduag | Pathfinder: Wrath of the Righteous
cults3d
Lastly, for the purpose of figuring out which spider leg goes where, notice the little indents on their keys and on the slots at her back. These should help you!Optimized for resin printing, comes fully pre-supported by hand. Includes Lychee...
Simple Insert for Lost Cities
thingiverse
... Important: This is designed to hold the cards from the original Kosmos version of Lost Cities, not the remake by Rio Grande Games Lost Cities: The Board Game! <h3>If you like what I'm doing...</h3>...consider buying me a coffee or tipping.
The Mysterious cities of gold Medallion
pinshape
Medallion from the Mysterious Cities of gold
